Device | Device Controls

This tab provides various options to send certain commands to the device. For example, using the device controls to toggle the device Setup Mode button keeps the device on Setup Mode. Use the options on this tab as follows:

  1. For Setup Mode, click:
    • On -when selected and Fetch Setup Mode is clicked, the device enters Setup Mode.
    • Off - to exclude Setup Mode.
  2. For Fetch Setup Mode, click FETCH VALUE to send emails with this value.
  3. For Device Reboot, click:
    • Hard to configure the device to do a hard reboot.
    • Soft - to configure the device to do a soft reboot.
  4. For Factory Reset, click RESET - to return the device to the initial factory state.
  5. For Logs, click:
    • Enable to capture debugging details defined in Log Levels. The log details are maintained for 30 days. This uses additional computing resources.
    • Disable - for no logging.
  6. For Remote Client, enter the CLI command, and then click SEND to invoke the command on the device.
  7. For Service (which is only an option from the Development environment of the dashboard), click either:
    • Developer to change the device to the Development service.
    • Field to change the device to the Field service.

 

See also:Devices.

How to get here on the dashboard: Click Devices in the Navigation Panel, the device entry in the table on the All Devices tab, and then the Device Controls tab.

Please click here to let us know how we're doing. Thank you.